pneumatic chisels for stone carving.

In the section, you will be able to see our pneumatic carbide tool which can work with our MR serie pneumatic stone hammer or other pneumatic stone hammer that you are using currently or eg. chicago hammer.

The pneumatic chisels are built for granite carving unless otherwise stated. However, you can use them for other material. The carbide tip quality of the pneumatic chisels are very solid carbide therefore if you are using them for your stone carving job for other material other than granite, it should not be a problem.

The pneumatic chisels that you can find here are lettering chisels, shock chisels and pointed end chisels. These pneumatic chisels come in the connection 7,4mm, 10,2mm, 12,5mm as per stated . In the case of tapered shank , you can use it on the chicago stone hammer.

One main point to remember when using carbide chisels is : do not give a lever of movement but always let your carbide chisels or pneumatic chisels "dance" on the stone

Pneumatic chisels

Pneumatic lettering carbide chisel Fort type with Ø12.5mm connection

Especially good for granite and other types of natural stone.
High quality carbide tip - long lasting sharpness before the next resharpening is necessary.
Save your working time and work efficient.

Qty:

Pneumatic point carbide chisel OS type with Ø12.5mm connection

Qty:

Pneumatic carbide tip chisel SM type in Ø7,4mm connection which you can use with the "E" cuturi.

This range is best for marble and sandstone from my experience.
I would strongly advice other range of pneumatic carbide chisel above if you are working with granite.
It is also that you will need a stronger hammer for granite work.

Qty: